Digital Wireless Receiver and Camera.

Digital Wireless Receiver - Only for the "Larsen" brand standard definition wireless cameras.

Digital Wireless Receiver - for use with displays without wireless capabilities. 

You can use the receiver to connect a wireless camera to an existing display - JD, Trimble, and so on. 

You will need an adapter cable from your dealer in order to connect to the display, you need the cable that connects your display to the CabCam brand connectors/cameras.  

All the "Larsen" brand wireless cameras can be used with the wireless receiver.

To set up the system:

• Connect the receiver to the monitor and power up.
• Connect the camera to power.
• Press the button on the wire from the receiver and hold for around 5 sec. until the screen show that it is pairing.
• Press the "Pair" button with a paper clip or similar on the camera (backside of the camera - small hole) 
• The camera and receiver should now be paired and the picture will show on the screen.
• This is a one-time setup. The setting will be stored in the system.

 Instructions