LED-3630 Flood Skid Steer Headlight is a Plug & Play LED Light. Fits into original housing.
Replaces OEM Part Numbers:
Case & New Holland: 84306271, 84306268, 84306337
Note: This light fits New Holland Skid Steers with Heavy Duty Light Housing.
The LED-4017 Skid Steer light. Fits into OEM housing. Replaces OEM Part Numbers: Bobcat: 6661353, JD: MG86533428, New Holland: 9829523. Please compare to your machine as some models use the LED-4010, also used as the front lights. Sold as QTY 1.
LED-458 JD Skid Steer Light. Replaces OEM Part Numbers: AT352538. Read fitment notes as the light is too deep for the front-facing lights on some JD skid steers.
LED-750 for Bobcat Skid Steer LED Headlight, Plug & Play LED Light. Fits into original housing. Sold as a pair of right and left lights. Replaces OEM Part Numbers:
Bobcat: 7251341 (Left), 7251340 (Right).
Bobcat skid Steer Headlight, Plug & Play LED Light. Fits into original housing, right & left. Sold in pairs. Replaces Bobcat Part Numbers: 7259523, 7259524, 6718042, 6718043
Plug & Play flush mount LED Light. Direct replacement.
Replaces OEM Part Numbers:
Case: 87584890, 47682620, 84236850, 47682629
John Deere: AT469589, AT323301, AFH209737, AT440366
MacDon: 109717. Tiger Lights
Expect better visibility and higher productivity with this rugged light. The lens optics place bright white light where it is needed. Recommended for off-road applications.Includes: (2) HA84306268
LED-409A - a 40 watt, 40° beam LED light for the center grill lights on newer CaseIH tractors. 3 used for the MX / Magnum, and 6 for the large STX models. Also available as Spot beam. John Deere OEM Part Number: AL209455. Challenger OEM Part Numbers: 519438D1, 526701D1. CASE / IH OEM Part Numbers: 87539115, 87328621. Will bolt into CIH OEM light housing part #: 87455676, 87455677, 87308895.
Expect better visibility and higher productivity with this rugged light. The lens optics place bright white light where it is needed. Recommended for off-road applications.SAVE Buy 2, HA84306268 SET!
Ideal for use at blind intersections and aisles! Mount this warning light to a forklift, skid-steer or any moving vehicle. A bright blue beam of light is projected onto the floor right behind the moving vehicle to alert pedestrians. Recommended for off-road applications.
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam.
High power 40 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 4 x 10 watt LED chips. This light will only fit in normal full size housings due to large cooling fins.
PAR-36 size replacement LED light for the old style sealed beam halogen light. 5-watt CREE LED chips. Actual power use is around 18 watts, effective lumen around 1400, raw lumen around 2200.
LED-12X, 9" - 20 watt is a bolt-on strip light, that aims the light down 45° - this is a great addition to skid steers as a sidelight, and can also be used as work lights on service trucks, exit lights, under panel lights, and much more.
Complete LED Light Kit for Kubota SSV Skid Steers. Uses Original Mount & Wiring. Includes: Connector and Stainless Steel Hardware. These lights will bolt into the original mount on the skid steer. Ships from Tiger lights.
TL910 Set of Right and Left. LED Rear light + amber flasher for Kubota Skid Steer. Uses Original Mount & Wiring. Includes: Connector and Stainless Steel Hardware. This light will bolt into the original mount on the skid steer. Replaces Kubota Part Number: V1311-53540. Includes right and left light (set). Ships from Tiger lights.
LED Headlight for Kubota Skid Steer. Uses Original Mount & Wiring. Includes: Connector and Stainless Steel Hardware. This light will bolt into the original mount on the skid steer.
Replaces Kubota Part Number: V1311-53520. Ships from Tiger lights.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.