Arms & Bases

The RAM-B-202U consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPs hole pattern.

The RAP-B-200-1-18U consists of an 18" rigid aluminum rod and (2 qty) single socket arms for 1" ball bases/adapters. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The single socket is compatible with all 1" ball bases and adapters.

The RAM-B-237U, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a 1/4"-20 camera thread. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera.

Rail and bar base for UTVs and ATVs includes strap clamp and U-bolt componentsIncluded B size 1" RAM® rubber ball allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustabilityMade of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

The RAP-B-238U consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles.

The RAM RAM-B-125BU, curved extension base includes a 1" rubber ball; it allows for almost infinite adjustment and perfect viewing angles. Originally designed to position your GPS in front of the yoke on your plane, the extension plate can also be used in many other applications. The mounting section of the plate is 2.5" square, predrilled holes for many different screw hole patterns, including the universal AMPS hole pattern and all RAM made cradles. The connection section extends approximately 2.25" forward, at a 45 degree angle, from the center of the 1" ball and approximately 1.5'' above the 1" ball (to the bottom of the connection section of the plate).

The RAM-B-238U consists of a B size 1" diameter rubber ball on a 2.43" x 1.31" diamond plate. The plate has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM mounts and third party cradles.

The RAM-B-201U, Medium length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm, keeps the socket open, allowing you to incert the ball in to the socket connection. RAM's socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.Dimensions: Overall Length: 3.69"Socket-To-Socket Length: 3"

The RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.Dimensions:Overall Length: 3.69"Socket-To-Socket Length: 3"

Zinc-coated metal U-bolt base with 1" rubber ball is designed to sit at right angles to mounting rail; includes black cover caps for exposed ends of the U-boltCompatible with any B size RAM® Mounts component; ball and socket technology allows for near-infinite adjustabilityMade of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

The RAM-B-201U-C, Long length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm, keeps the socket open, allowing you to incert the ball in to the socket connection. RAM's socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.Dimensions: Overall Length: 6"Socket-To-Socket Length: 5.25"

This bracket kit comes with 2 straight brackets (C-R343683) and 1 bent bracket (C-R343682). Also includes hardware. Ideal for mounting Ram Mount items in tractor cabs, combine cabs, etc.

The RAM Track Ball is made up of a B size 1" rubber ball molded to a high strength composite base, a rubber friction washer and a stainless steel T-bolt for sliding into virtually any track system. Simply insert or slide the Track Ball into your track and twist the ball clockwise to tighten in place. Twist counterclockwise to loosen or adjust the ball.T-Bolt Dimensions: .48" x .95"

The RAM-B-111BU consists 1" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.

The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.Clamping Range (Rail/Tube Surfaces):0.625" to 1.5"Clamping Range (Flat Surfaces):0" to 1.14" Physical Dimensions:Height: 4.25"Width: 1.18"

The RAM-B-166-103U consists of a 3.3" suction cup twist lock base and STANDARD length double socket arm for 1" ball diamond bases. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The socket arm is compatible with all 1" ball bases and adapters.

The RAM-B-224-1U consists of a 3.3" diameter suction cup twist lock base that is connected to the (RAM-B-238U), diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.

The RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 1" to 1.875" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw will soon become another essential RAM® component in your collection of mounting options.Clamping Range (Rail/Tube Surfaces): 1" to 1.875" Clamping Range (Flat Surfaces): 0" to 1.6" Physical Dimensions: Height: 5.25" Width: 1.56"

With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is designed for use with #10 screws for easy installation - hardware not included. The Tough-Track works with a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones, and tablets.Dimensions:Overall length: 10.75"Overall width: 1.75"Track thickness: .35"Inside track length: 9"

With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is designed for use with #10 screws for easy installation - hardware not included. The Tough-Track works with a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones, and tablets. Dimensions:Overall length: 14.5"Overall width: 1.75"Track thickness: .35"Inside track length: 12"

With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is designed for use with #10 screws for easy installation - hardware not included. The Tough-Track works with a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones, and tablets. Dimensions:Overall length: 7"Overall width: 1.75"Track thickness: .35"Inside track length: 5"

The RAM-B-108BU consists of a 1" diameter rubber ball connected at a right angle to a v-shaped base. The RAM-B-108BU accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. Clamp Dimensions: 1" to 2.1"