The LED-20 is a very small light, but with 2 10 watt CREE led chips, it has a great light output. So small it fits almost anywhere. Excellent on combine headers for stubble light.
Plug & Play flush mount, 4x6 LED Headlight, Hi/Lo Beam. Direct replacement. Cast aluminum body. Uses original mounting hardware.
Replaces OEM Part Numbers: MacDon 110268. John Deere: AFH208686.
Plug & Play flush mount LED Light. Direct replacement.
Replaces OEM Part Numbers:
Case: 87584890, 47682620, 84236850, 47682629
John Deere: AT469589, AT323301, AFH209737, AT440366
MacDon: 109717. Tiger Lights
Perfect size light with the 1" ball mount for the center grill lights on the JD 8000/8010 series tractors. 6 x 5 watt CREE LED's, 5200 kelvin, 2700 lumen effective. This light is now made so only half the LED's turn on if on low beam, on high beam all LED's are on. Adapter cable that connects the wires from the corner lights to the center lights included and is needed for the function of the lights.
HP-2 is a 4" LED light made for use on most tractors and combines where a small square light is needed. 40 degree light beam, 3300 lumen effective ! Much brighter light than OEM LED lights ! Narrow flood - more distance than the 60° flood.
HP-2 is a 4" LED light made for use on most tractors and combines where a small square light is needed. 60 degree light beam, 3300 lumen effective ! Much brighter light than OEM LED lights !
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
An LED replacement light for JD combines with the rectangular row finder light that is mounted in the grain tank, right and left side. The price is for one light. It comes with a steel frame that bolts onto the light to make the light seal better when installed in place of the OEM light.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
Headlight for some Agco tractors using 3 bolts to hold the light. Spacing between the 2 mounting holes is 5". Please verify your tractor use the 3 hole system before ordering.
LED-4013 Hi-Lo or as flood using the included adapter wire. Claas Combine Light. Will also fit some Massey Ferguson tractors with high visibility cabs and John Deere Forage Harvesters. Replaces OEM Part Numbers: AZ41570, 3713134M91
Expect better visibility and higher productivity with this rugged light. The lens optics place bright white light where it is needed. Recommended for off-road applications.Includes: (2) HA84306268
4 x 6 style, 45 watt LED 60° flood light. The flood beam is made in the lens for a wider pattern than the 845-2. "Easy Mount Bracket" - this bracket will fit into a 1.25" "U" clamp, and can not be used unless installing into existing "U" clamp.
4 x 6 style, 45 watts LED flood light. The light beam is created in the reflectors, and a clear lens is used for higher lumen output.
"Easy Mount Bracket" - this bracket will fit into a 1.25" "U" clamp, and can not be used unless installing into existing "U" clamp.
LED-845 - a 4 x 6 style, 45 watts LED 60° flood light. Connectors for the 44, 66, 77, and 88 series combines installed.
Use the 845 for stubble, auger, and rear lights - use the 845-2 for the side/row finder lights.
LED-845-2 - a 4 x 6 style, 45 watts LED flood light. Connectors for the 44, 66, 77, & 88 series CIH combines installed. Use the 845 for stubble, auger, and rear lights - use the 845-2 for the side/row finder lights.
The 845-2 has a more concentrated light beam than the 845, although still considered a flood light.
4 x 6 style, 45 watt LED 60° flood light. The flood beam is made in the lens for a wider pattern than the 845-2. "Easy Mount Bracket" - this bracket will fit into a 2" wide "U" clamp, and can not be used unless installing into existing "U" clamp.
LED-4012 flood, Claas /MF Combine Light. Also works on some Massey Ferguson tractors with high visibility cabs and John Deere Forage Harvesters. Replaces OEM Part Numbers: AZ41570, 3713134M91
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.